Now that you simply have received a Samsung Galaxy S3 GT-I9300 or GT-I9300T, you have to be itching to personalize it with custom ROMs and different mods, hacks, and tweaks. Before you are able to do that, nonetheless, it’s important to first gain root access in your smartphone and if you would like simple ROM installation, it’s important to install a custom recovery.
Doing those could possibly be difficult, not to point out very dangerous-but not anymore! There’s now a better and faster technique to root your gadget and install Clockworkmod Recovery at the same time. The tool is known as CF-Root 6.3.Just after the launch of the new Samsung Galaxy S3, recognized XDA Developers member Chainfire posted a way on tips on how to root the device. The stated technique was efficient enough to root the gadget, however some owners discovered it very difficult and complicated, to not mention that it didn’t include ClockworkMod Recovery. That earlier technique employed flashing an insecure kernel prior to installing root and SuperSU.
This time, Chainfire came up with a new rooting bundle referred to as CF-Root 6.3, which makes the rooting process simpler than the previous one. All it’s essential do is to flash the package in your smartphone through Odin and it’s done.
It’s additionally better as a result of flashing the package additionally automatically installs ClockworkMod Recovery, SuperSU (root access manager), and the ClockworkMod Recovery Manager app. It’s positively probably the most recommended technique to gain root access in your Galaxy S3 as a result of it’s quicker, simpler, and safer.If you wish to flash this package in your smartphone, see the necessities and instructions below.
Disclaimer
- Applying these instructions on another device or model may produce undesired outcomes.
- The instructions in this guide are intended for use of Samsung Galaxy S3, model numbers GT-I9300 and GT-I9300T.
- There is no guarantee that these instructions will work under your specific and unique circumstances.
- The information in this guide is provided for instructional and educational purposes only.
- We shall not hold any responsibility or liability for whatever happens to you or your device arising from your use of the info in this guide.
- Use these instructions at your own risk.
- Read and understand the whole guide first before actually performing the instructions.
Requirements
- Samsung Galaxy S3 GT-I9300 or GT-I9300T
- A Windows PC
- Phone drivers installed on the PC. You can get the drivers by installing Samsung Kies. Or, get them from any of these links: 32-bit (x86) Windows | 64-bit (x64) Windows.
- Enable USB debugging on your phone.
- Disable system tools such as firewall program, anti-virus software, and Samsung KIES to avoid interruptions throughout the procedure.
- Backup all personal data on your phone to make sure you have a copy of your personal data (e.g., contacts, SMS, MMS, Internet settings, Wi-Fi passwords, and the like) in case the procedure in this guide erases such data.
-
- For backup tips, check our guides on how to sync your data to the cloud and how to create local backups of your mobile data.
- Make sure that your battery has sufficient power (at least 50%) to avoid interruption due to power loss.
- Download the following to your computer.
-
- Odin3 v1.85 (Odin3-v1.85.zip, 198 kB)
- CF-Root 6.3 (CF-Root-SGS3-v6.3.zip,7.1 MB
Instructions
- Extract CF-Root-SGS3-v6.3.zip to your computer and you will get CF-Root-SGS3-v6.3.tar.
- Extract the Odin3-v1.85.zip file into a folder on your computer to get Odin3-v1.85.exe. We recommend you extract it to the Desktop where you can easily find it.
- Turn off your phone.
- Put your Samsung Galaxy S3 into Download Mode by pressing the Volume Down key, Home button (middle key), and Power button together, then press the Volume Up button right after the screen turns on to finally enter Download Mode.
- Connect your Samsung Galaxy S3 to your computer via USB cable.
- Go to the folder where you extracted Odin3-v1.85.zip and double-click Odin3-v1.85.exe to launch Odin on your computer. You will know when Odin recognizes your phone if you see an “Added” message in its lower-left message box. If your phone is not recognized, there is something wrong with the installation of the drivers, so disconnect the phone and re-install them.
- In Odin, click the PDA button and select the CF-Root-SGS3-v6.3.tar file that you have downloaded earlier.
- Under Options, make sure that “Repartition” is not checked.
- Click the Start button in Odin3 to flash CF-Root 6.3 on your Samsung Galaxy S3 and wait for it to finish.
- Once the flashing is done you will get a “PASS” message with a green background on Odin, indicating that flashing is successful. You may disconnect your phone from the computer at this point.
- Your phone will automatically reboot into ClockworkMod Recovery and the rooting procedure will begin, after which your phone will reboot once more into Normal Mode. If the phone doesn’t boot into ClockworkMod Recovery, it’s possible that the rooting process failed. In that case, go through the steps again starting at step 3.
For our readers who prefer to watch these steps in action, see our video tutorial (done by our in-house expert on the Galaxy S3, Clayton Ljungberg) below. The video tutorial uses an earlier version of CF-Root (6.2), but the version used in the text guide is more up-to-date and works just as well.
You have successfully rooted your Samsung Galaxy S3 GT-I9300 or GT-I9300T and flashed ClockworkMod Recovery. You can now flash custom ROMs on your phone.
Post a Comment